Description
Bellicide Biocide for Diesel, Biodiesel, Heating Oil, Gasoline, and Other Finished Fuels. Kills microbes completely within 2 hours and keeps killing fuel-borne microbes for up to 4 weeks!
NOTE: We are currently shipping Bellicide to the following states: Alabama, Arizona, Arkansas, California, Colorado, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, and Wyoming.
If your state isn’t listed, please click here to contact us.
Bellicide protects the investment of both stored fuels and the equipment they go in.
Unfortunately, stored fuels tend to develop water accumulation, which leads to the growth and flourishing of harmful microbes.
Microbial contamination in a fuel tank is bad news because the microbes (bacteria and fungi) break down the fuel, ruining expensive fuel investments.
- Microbial colonies plug fuel filters
- Microbes give off acidic byproducts which destroy fuel quality
- Microbial byproducts contribute to expensive tank corrosion
Not only that, but once they are in fuel tanks, microbes are nearly impossible to get rid of. Simply removing accumulated water is not usually enough to solve the problem. Until now!
Product Overview
Bellicide eliminates and prevents the growth of bacteria and fungi in finished fuels while preventing their biodegradation. Bellicide is essential for keeping stored fuels fresh and microbe-free!
Product Details
Bellicide is used to eliminate and prevent the growth of bacteria and fungi (microbes) in finished fuels such as diesel, biodiesel, gasoline, and Bunker C fuel oil. Bellicide is also used to prevent the biodegradation (reduction of fuel quality caused by microbes) of crude, refined and feedstock oils and fats (e.g. poultry, soybean, aromatic, paraffinic, naphthenic) during storage.
Benefits of Bellicide Biocide Treatment
Bellicide knocks out microbial fuel problems:
- Broad-spectrum: kills bacteria, fungi, and algae
- Active in both phases of the system – partitions into both fuel and water
- Fast Acting: 100% bacterial kill in just a few hours
- Long-Lasting: Maintains a 100% kill rate for up to four weeks
- Fully combustible
Comparative Kill Study Testing
Bellicide was tested in the laboratory in kill studies to compare its effectiveness compared to three other leading fuel microbicides.
The microorganisms used in the study were the bacterium Pseudomonas aeruginosa, and the fungus Hormoconis resinae, both of which are widely found in fuel, grow quickly in large numbers, and multiply well both in water and at the fuel-water interface.
The results of the study show Bellicide providing excellent results at the minimum recommended dose after both one and four weeks.
Confused about biocide choices? Check out how Bellicide compares to other choices in the market.
Treat Rates
Bellicide eliminates existing microbial colonies in contaminated systems with a treat rate of just 2.5 fluid ounces per 100 gallons of fuel (200 ppm) or half an ounce per 20 gallons of fuel.
To maintain a microbe-free system environment (maintenance dosage), Bellicide can be added at a treat rate of just 1.25 fluid ounces per 100 gallons of fuel (100 ppm) or half an ounce per 40 gallons of fuel.
At the maintenance dose of 1.25 ounces per 100 gallons, Bellicide imparts a minimum amount of sulfur to the fuel.
Available Sizes
Bellicide is available to the public in single-bottle 16 oz. and 1-gallon sizes. For case product pricing, contact Bell Performance for more information at 407-831-5021. Or click here to submit a request for case pricing.
Note on International Shipping
International shipment of Bellicide is restricted. Please contact Bell Performance for restrictions and details.
Explore more from our collection.
Reviews
There are no reviews yet.